MYK Laticrete DWA 215 is a single-component, ready-to-use modified polyurethane paste adhesive for interior tile installations - open the pail and apply directly, no mixing required. Classified as D2TE under EN 12004 / ISO 13007 and exceeding ANSI A136.1 and IS 15477:2019, it delivers initial shear adhesion greater than 1.5 MPa with a 30-minute open time, 20-minute adjustability window, and a non-sag formulation (slip less than 0.5 mm) for vertical wall installations. Structurally flexible, it suits substrates subject to thermal expansion and minor deflection - drywall, plywood, tile-on-tile, and pre-cast concrete. Very Low VOC, Green Building certified. Do not add water, latex, sand, or any admixtures - this permanently destabilises the chemical matrix.
Key Features
- Single-component ready to use: No mixing, no admixtures - open the pail and apply directly
- 30-minute open time: Extended working window for large-format tiles and complex layouts
- Non-sag vertical formulation: Slip less than 0.5 mm - holds tiles firmly on walls during cure
- Greater than 1.5 MPa shear adhesion: Exceeds ANSI A136.1 and IS 15477:2019 bond strength requirements
- Flexible formulation: Absorbs thermal expansion and minor structural movement - suitable for plywood, drywall, and tile-on-tile
- Very Low VOC: Green Building certified - safe for interior use
