Century Sainik 710 BWP Marine Plywood is a boiling water proof marine grade plywood manufactured by Century Plyboards, engineered for wet areas, exterior applications, and marine use. The BWP marine grade provides superior water resistance and durability, making it suitable for demanding applications exposed to moisture and weather.

Ideal for bathrooms, kitchens, exterior cladding, boat building, and outdoor furniture, Century Sainik 710 offers premium waterproof performance from a trusted brand. Perfect for residential and commercial applications in Bangalore requiring reliable waterproof plywood for wet areas and exterior use.

Recommended Applications

• Bathroom Cabinets: Waterproof plywood ideal for bathroom vanities and storage
• Kitchen Cabinets: Perfect for kitchen cabinets near sinks and wet areas
• Exterior Cladding: Suitable for exterior wall cladding and outdoor applications
• Marine Use: Boat building and marine applications requiring waterproof plywood
• Outdoor Furniture: Durable plywood for outdoor furniture exposed to weather
• Wet Area Applications: Essential for areas with high moisture exposure

Century Sainik 710 BWP Marine Plywood is a boiling water proof marine grade plywood manufactured by Century Plyboards, engineered for wet areas, exterior applications, and marine use. The BWP marine grade provides superior water resistance and durability, making it suitable for demanding applications exposed to moisture and weather.

Ideal for bathrooms, kitchens, exterior cladding, boat building, and outdoor furniture, Century Sainik 710 offers premium waterproof performance from a trusted brand. Perfect for residential and commercial applications in Bangalore requiring reliable waterproof plywood for wet areas and exterior use.

Recommended Applications

• Bathroom Cabinets: Waterproof plywood ideal for bathroom vanities and storage
• Kitchen Cabinets: Perfect for kitchen cabinets near sinks and wet areas
• Exterior Cladding: Suitable for exterior wall cladding and outdoor applications
• Marine Use: Boat building and marine applications requiring waterproof plywood
• Outdoor Furniture: Durable plywood for outdoor furniture exposed to weather
• Wet Area Applications: Essential for areas with high moisture exposure

Action Tesa Boilo Board is a boiling water resistant board manufactured by Action Tesa, engineered for furniture and interior applications in wet areas. The plain finish provides a smooth surface ready for lamination or painting, while the boiling water resistant properties ensure durability in moisture-prone environments.

Ideal for kitchen cabinets, bathroom vanities, and furniture in wet areas, Action Tesa Boilo Board offers reliable moisture resistance at an economical price point. Perfect for residential and commercial applications in Bangalore requiring water-resistant board for furniture and interior work.

Recommended Applications

• Kitchen Cabinets: Ideal for kitchen cabinets in wet areas near sinks
• Bathroom Vanities: Perfect for bathroom vanities and storage
• Furniture: Suitable for furniture in moisture-prone areas
• Interior Paneling: Wall paneling in wet areas
• Shelving: Shelves in bathrooms and kitchens
• Lamination Base: Smooth surface ready for laminate application

Archidply PURE DECOR 710 BWP Plywood is a high-performance boiling water proof plywood manufactured by Archidply, engineered for superior strength and moisture resistance in demanding conditions.  The BWP grade is bonded with Phenol Formaldehyde (PF) to ensure the core remains intact even under extreme moisture or boiling water exposure.

Ideal for modular kitchens, bathroom cabinets, and high-humidity partitions, Archidply PURE 710 offers a high-density 100% hardwood core that is termite and borer resistant. Perfect for residential and commercial interior applications in Bangalore requiring a dimensionally stable, marine-like plywood with a reliable 15-year warranty.

Recommended Applications

• Modular Kitchens: Ideal for low wet zones and areas prone to water spills.
• Bathroom Cabinets: Suitable for cabinets with external moisture exposure.
• Commercial Furniture: High-strength furniture for offices and retail spaces.
• Paneling & Partitions: Decorative wall and ceiling paneling in high-humidity areas.
• High-Humidity Interiors: Effective in areas with persistent moisture levels.
• Semi-Exterior Applications: Suitable for protected areas with limited outdoor exposure.

Century Sainik MR 303 Plywood is a moisture resistant grade plywood manufactured by CenturyPly, engineered for interior furniture and applications in dry conditions. It carries an E2 Grade Standard emission certification, a cost-effective, internationally recognised formaldehyde emission standard suited to general indoor and commercial furniture use, while the MR 303 grade provides protection against moisture in normal humidity conditions with quality construction and reliable performance.

Ideal for wardrobes, kitchen cabinets, furniture, and interior paneling in dry areas, Century Sainik MR 303 offers dependable quality from a trusted brand. Perfect for residential and commercial interior applications in Bangalore requiring reliable moisture resistant plywood for furniture and interior work

Where this fits best

• Wardrobes: Ideal for bedroom wardrobes and closets in dry areas
• Kitchen Cabinets: Suitable for kitchen cabinets in well-ventilated kitchens
• Furniture: Perfect for beds, tables, chairs, and other interior furniture
• Interior Paneling: Wall paneling and ceiling applications
• Shelving: Bookshelves, display units, and storage shelving
• Dry Area Applications: Interior applications in areas with normal humidity

.

MYK Laticrete DWA 215 is a single-component, ready-to-use modified polyurethane paste adhesive for interior tile installations - open the pail and apply directly, no mixing required. Classified as D2TE under EN 12004 / ISO 13007 and exceeding ANSI A136.1 and IS 15477:2019, it delivers initial shear adhesion greater than 1.5 MPa with a 30-minute open time, 20-minute adjustability window, and a non-sag formulation (slip less than 0.5 mm) for vertical wall installations. Structurally flexible, it suits substrates subject to thermal expansion and minor deflection - drywall, plywood, tile-on-tile, and pre-cast concrete. Very Low VOC, Green Building certified. Do not add water, latex, sand, or any admixtures - this permanently destabilises the chemical matrix.

Key Features

• Single-component ready to use: No mixing, no admixtures - open the pail and apply directly
• 30-minute open time: Extended working window for large-format tiles and complex layouts
• Non-sag vertical formulation: Slip less than 0.5 mm - holds tiles firmly on walls during cure
• Greater than 1.5 MPa shear adhesion: Exceeds ANSI A136.1 and IS 15477:2019 bond strength requirements
• Flexible formulation: Absorbs thermal expansion and minor structural movement - suitable for plywood, drywall, and tile-on-tile
• Very Low VOC: Green Building certified - safe for interior use

 

MYK Laticrete LATICRETE® 303 is a factory-blended, single-component, polymer-modified economy thin-set mortar for interior tile installations on stable masonry substrates. Add clean water, mix to a smooth paste, and apply - no on-site blending of multiple components required. Provides excellent tack, non-sag performance, and spreadability for fixing standard ceramic tiles and small-format natural stones on cement mortar beds, cement plaster, brick masonry, and cement terrazzo. Practically nil VOC. Suitable for interior dry area residential and commercial projects where reliable, code-compliant performance is required at an economical cost.

Key Features

• Single-component - just add water: No on-site blending of multiple materials - reduces handling errors and labour time
• Economical formulation: Budget-friendly polymer-modified mortar optimised for standard interior ceramic tile projects
• Good substrate adhesion: Bonds securely to cement plaster, brick walls, terrazzo, and concrete floor beds
• Non-sag and spreadable: Smooth, workable consistency for easy application and tile alignment
• Practically nil VOC: Safer indoor air quality for enclosed residential and commercial spaces

Roff T01 NCA Tile Adhesive is a single component polymer-modified cement-based tile adhesive engineered for fixing ceramic, terracotta, vitrified tiles, and natural stones on interior floors and walls. The advanced polymer modification provides superior bonding strength and flexibility for long-lasting tile installations.

With water-resistant properties, Roff T01 NCA is ideal for wet areas including bathrooms, kitchens, and utility rooms. The grey formulation offers excellent coverage and workability, making it a reliable choice for residential and commercial tiling projects in Bangalore requiring durable, moisture-resistant tile fixing solutions.

Recommended Applications

• Bathroom Tiling: Water-resistant properties make it ideal for bathroom floors and walls
• Kitchen Installations: Perfect for kitchen backsplashes, countertops, and floor tiling
• Interior Floor Tiling: Excellent for ceramic and vitrified tile installation on interior floors
• Wall Tiling: Suitable for interior wall tile applications in residential and commercial spaces
• Wet Area Applications: Ideal for utility rooms, washrooms, and other moisture-prone areas
• Natural Stone Fixing: Effective for fixing natural stone tiles on interior surfaces

Priya PPC Cement is engineered with finer particles and pozzolanic additives including fly ash to deliver superior workability and smooth finishes in masonry and plastering applications. This eco-friendly cement offers excellent adhesion properties while reducing environmental impact through sustainable manufacturing practices.

Designed specifically for Bangalore's climate conditions, Priya PPC Cement generates lower heat during curing, minimizing thermal cracking risks. It develops consistent long-term strength that matches or exceeds traditional OPC cement, making it a cost-effective and environmentally responsible choice for construction projects.

Recommended Applications

• Masonry Work: Superior adhesion for brick and block construction in residential and commercial buildings
• Plastering: Smooth, fine finish for interior and exterior wall surfaces
• Brickwork: Excellent bonding properties for laying bricks and blocks
• General Construction: Suitable for non-structural concrete and general building applications
• Grouting: Effective for filling joints, gaps, and voids in construction work
• Repair and Restoration: Ideal for maintenance, patching, and renovation projects

Installation Guidelines

Ultratech PPC Cement is trusted by builders and homeowners across Bangalore for its superior workability and smooth finish in masonry and plastering operations. Enhanced with pozzolanic materials like fly ash, it offers an eco-friendly alternative to traditional OPC cement with reduced CO₂ emissions.

This PPC cement develops strength steadily over time, often matching or surpassing the long-term strength of OPC, while generating less heat during curing—a key benefit in Bangalore's humid climate that minimizes thermal cracking and ensures durable, long-lasting construction.

Recommended Applications

• Masonry and Brickwork: Superior adhesion for brick and block work in residential and commercial construction
• Plastering Works: Smooth finish for interior and exterior wall surfaces with excellent workability
• Grouting Applications: Effective for filling gaps, voids, and joints in construction projects
• Repair and Restoration: Ideal for maintenance, patching, and restoration work on existing structures
• Foundation Work: Suitable for non-load bearing concrete structures and general construction

Installation Guidelines